SALT LAMP DIFFUSER（Wooden Grain）
2-in-1 Himalayan Salt Lamp & Ultrasonic Oil Diffuser
Bring calm to your space with this beautifully crafted 2-in-1 Himalayan salt lamp and ultrasonic oil diffuser. Designed to purify the air and enhance your well-being, it combines the therapeutic benefits of aromatherapy with the natural ionizing power of Himalayan salt crystals.
At Salking, we are committed to wellness through nature. Our diffusers are made with eco-conscious materials and designed for longevity, helping reduce waste and encourage daily moments of calm.
SALT LAMP DIFFUSER（Wooden Grain）
Frequently asked questions
- When water exceed max the diffuser will not mist.
- The diffuser will shut off automatically when water runs to low level
- Check that the diffuser is on a level, hard surface.
- Do not run your diffuser on a towel or any soft surface that will restrict the air flow.
- Clean your unit. Unplug, refill if necessary, reconnect and turn the diffuser on again.
- Make sure you are using only filtered water, tap water or spring water. Do not use distilled water as this affects the diffusion.
- Clean your unit.
- Make sure you are using only filtered water, tap water or spring water. Do not use distilled water as this affects the diffusion.
- Check for correct water level. Over filling the unit or too little water in the unit may be the cause.
- Check that the air intake is not obstructed, and that the air flow is not restricted. Over time, hair or dust can enter the unit through the air intake.
- Make sure that this is unobstructed.
- Only operate the diffuser on a level, hard surface. Do not run your diffuser on a towel or any soft surface that will restrict the air flow.
- Check to see if the water level sensor is clean and unobstructed.
- If all is good, keep it unplugged for a few minutes, refill, and restart the diffuser.
- Make sure there is power coming from your source and the adapter is properly plugged in.
- Clean the diffuser reservoir, pour enough distilled white vinegar inside and let soak overnight, Rinse with warm water, Take cotton swab and gently wipe up around the ceramic disc at the bottom of reservoir.
- Air Drying, be sure to avoid any water getting into the air outlet opening at the top of the reservoir, That opening leads directly to the electronics, the diffuser will not function correctly if they get wet. Try air drying your unit by removing the top cover, flipping the base upside-down and letting air dry for at least 24 hours.
- Check that there is water in the bowl and that the water level is correct.
- Ensure that you are using the correct power adapter.
- Make sure it is properly plugged in, and check that the power adapter is securely plugged into the wall socket.
- Check that the power supply is securely plugged into the socket at the back of the diffuser.
- Test the power source or try an alternate power source to ensure that there is adequate power being supplied to the unit.
- Make sure you are using only filtered water, tap water or spring water. Do not use distilled water as this affects the diffusion.
People often get water inside the diffuser through overfilling, bumping or moving the diffuser around while full. If water or essential oil enters the diffuser it will quit working.
If this happens, you should unplug and clean the unit and remove any water and let it sit for a day or two to "dry out". Water may evaporate in a matter of hours, but essential oils take more time. After it has had time to dry, refill and try it again. The moisture will evaporate and the diffuser should work once again.
